Authorized Distributor
?
Closed loop (compensated) voltage transducer using the Hall effect
| Secondary Nominal Current | 50 mA |
| Supply Voltage | ±16 ... 33 V |
| Operating Temperature Range | −25 … +70 °C |
| Isolation Test Voltage | 12 kV |
| Primary Nominal RMS Current (IPN) | 10 mA |
| Secondary Nominal RMS Current (ISN) | 50 mA |
Single or three phase inverters, Proplusion and braking choppers, Proplusion converters, Auxiliary converters, Battery chargers. Application Domain, Railway (fixed installations and onboard).
The LV 100-1000/SP13 is a closed loop (compensated) current transducer from LEM for the electronic measurement of voltages: DC, AC, pulsed..., with galvanic isolation.
It offers excellent accuracy, very good linearity, low temperature drift and wide frequency bandwidth. Typical applications include Single or three phase inverters, Proplusion and braking choppers, Proplusion converters and Auxiliary converters.
Key characteristics from the official datasheet: total error ±0.9 %; linearity error < 0.1 %; operating temperature −25 … +70 °C; nominal secondary output 50 mA.
| General Information | |
|---|---|
| Manufacturer | LEM |
| Product Series | LV |
| Product Reference | LV 100-1000/SP13 |
| Primary Nominal Current | 10 mA |
| Supply Voltage | ±16 ... 33 V |
| Measurement | voltages: DC, AC, pulsed... |
| Mounting | Busbar Mount |
| Application Domain | Railway (fixed installations and onboard) |
| Electrical Data — LV 100-1000/SP13 | |
|---|---|
| Primary Nominal RMS Current (IPN) | 10 mA |
| Secondary Nominal RMS Current (ISN) | 50 mA |
| Turns Ratio (NP/NS) | 10000 : 2000 |
| Supply Voltage (UC) | ±16 ... 33 V |
| Current Consumption (IC) | < 32 ( @ ±33 V) + I mA |
| Accuracy & Dynamic Performance | |
|---|---|
| Total Error (εtot) @ IPN | ±0.9 % |
| Linearity Error (εL) | < 0.1 % |
| Insulation Coordination | |
|---|---|
| RMS Voltage for AC Insulation Test (50 Hz, 1 min) Ud | 12 kV |
| Creepage Distance (dCp) | 164.8 mm |
| Clearance (dCI) | 47.1 mm |
| Comparative Tracking Index (CTI) | 600 |
| Environmental & Mechanical Characteristics | |
|---|---|
| Ambient Operating Temperature (TA) | −25 … +70 °C |
| Ambient Storage Temperature (TA st) | −40 … +85 °C |
| Mass (m) | 790 g |
| Case Material | Insulating plastic case recognized according to UL 94-V0 |
| General Tolerance | ±0.5 mm |
| Standards & Certifications | |
|---|---|
| 1) EN 50155: | |
Note: Specifications are taken from the official LV 100-1000/SP13 datasheet. Parameters that could not be confirmed from the datasheet are marked UNVERIFIED.
Official technical documentation for the LV 100-1000/SP13.
Outline dimensions, pin layout and connection diagrams of the LV 100-1000/SP13 are shown below.
| Outline Dimensions & Mechanical Data | |
|---|---|
| General Tolerance | ±0.5 mm |
| Mass | 790 g |
| Case Material | Insulating plastic case recognized according to UL 94-V0 |
Note: All dimensions are in millimetres. Refer to the official datasheet for the complete dimension drawing.
Typical applications of the LV 100-1000/SP13.
Characteristic curve diagrams are not included in the LV 100-1000/SP13 datasheet; the relevant characteristics are the accuracy and dynamic performance data listed below.
| Accuracy & Dynamic Characteristics | |
|---|---|
| Total Error (εtot) @ IPN | ±0.9 % |
| Linearity Error (εL) | < 0.1 % |
Note: For the full set of performance data, refer to the datasheet.
Other models of the LV100 Series share the same measurement principle, mounting concept and output interface family.
