Authorized Distributor
?
Split core current transformer
| Output Voltage Range | 0 V |
| Operating Temperature Range | −10 ... 55 °C |
| Isolation Test Voltage | 4.3 kV |
| Frequency Bandwidth | 1.5 kHz |
| RMS Voltage for AC Insulation Test (50 Hz, 1 min) Ud | 4.3 kV |
| Impulse Withstand Voltage (1.2/50 µs) UNi | 7.8 kV |
Hybrid inverter (Home Energy Storage), Power metering: current measurement for active power calculation, Building sub-metering: energy efficiency monitoring, consumption analysis and cost allocation, Power quality monitoring: electrical loads and distribution system equipment, Distributed measurement systems, Condition monitoring (e.g. Motor loads such as conveyers, pumps).
The ATO-10-B225-D10/SP3 ATO XDK is a None current transducer from LEM.
Typical applications include Hybrid inverter (Home Energy Storage), Power metering: current measurement for active power calculation, Building sub-metering: energy efficiency monitoring, consumption analysis and cost allocation and Power quality monitoring: electrical loads and distribution system equipment.
Key characteristics from the official datasheet: linearity error −0.1 ... 0.1 % of IPN; frequency bandwidth 1.5 kHz; operating temperature −10 ... 55 °C.
| General Information | |
|---|---|
| Manufacturer | LEM |
| Product Series | ATO |
| Product Reference | ATO-10-B225-D10/SP3 ATO XDK |
| Measurement | — |
| Mounting | — |
| Application Domain | Industrial |
| Accuracy & Dynamic Performance | |
|---|---|
| Linearity Error (εL) | −0.1 ... 0.1 % of IPN |
| Frequency Bandwidth | 1.5 kHz |
| Insulation Coordination | |
|---|---|
| RMS Voltage for AC Insulation Test (50 Hz, 1 min) Ud | 4.3 kV |
| Impulse Withstand Voltage (1.2/50 µs) UNi | 7.8 kV |
| Creepage Distance (dCp) | 8 mm |
| Clearance (dCI) | 8 mm |
| Environmental & Mechanical Characteristics | |
|---|---|
| Ambient Operating Temperature (TA) | −10 ... 55 °C |
| Ambient Storage Temperature (TA st) | −30 ... 90 °C |
| Mass (m) | 86 g |
| Standards & Certifications | |
|---|---|
| IEC 61010-1 | Compliance |
| IEC 61010-031 | ed1.1: |
| IEC 61869-1 | ed1.0: |
| IEC 61869-2 | ed1.0: |
| IEC 61869-6 | draft |
| IEC 61869-10 | draft 2016. |
Note: Specifications are taken from the official ATO-10-B225-D10/SP3 ATO XDK datasheet. Parameters that could not be confirmed from the datasheet are marked UNVERIFIED.
Official technical documentation for the ATO-10-B225-D10/SP3 ATO XDK.
Outline dimensions, pin layout and connection diagrams of the ATO-10-B225-D10/SP3 ATO XDK are shown below.
| Outline Dimensions & Mechanical Data | |
|---|---|
| Mass | 86 g |
Note: All dimensions are in millimetres. Refer to the official datasheet for the complete dimension drawing.
Typical applications of the ATO-10-B225-D10/SP3 ATO XDK.
Characteristic curve diagrams are not included in the ATO-10-B225-D10/SP3 ATO XDK datasheet; the relevant characteristics are the accuracy and dynamic performance data listed below.
| Accuracy & Dynamic Characteristics | |
|---|---|
| Linearity Error (εL) | −0.1 ... 0.1 % of IPN |
| Frequency Bandwidth | 1.5 kHz |
Note: For the full set of performance data, refer to the datasheet.
Other models of the ATO Series share the same measurement principle, mounting concept and output interface family.
