Authorized Distributor
?
Open loop
| Output Voltage Range | −2.3 ... 2.3 V |
| Supply Voltage | 3.14 ... 3.46 V |
| Accuracy @ IPN | 1.20 % of IPN |
| Operating Temperature Range | −40 ... 105 °C |
| Isolation Test Voltage | 4.4 kV |
| Primary Nominal RMS Current (IPN) | 130 A |
AC variable speed and servo motor drives, Static converters for DC motor drives, Battery supplied applications, Uninterruptible Power Supplies (UPS), Switched Mode Power Supplies (SMPS), Combiner box, Solar inverter on DC side of the inverter (MPPT), Plasma cutter, welding, Charging station.
The HOB 130-P/SP34 is an open loop current transducer from LEM for the electronic measurement of current: DC, AC, pulsed..., with galvanic isolation.
Typical applications include AC variable speed and servo motor drives, Static converters for DC motor drives, Battery supplied applications and Uninterruptible Power Supplies (UPS).
Key characteristics from the official datasheet: linearity error 0.45 % of IPN; frequency bandwidth 1000 kHz; operating temperature −40 ... 105 °C.
| General Information | |
|---|---|
| Manufacturer | LEM |
| Product Series | HOB |
| Product Reference | HOB 130-P/SP34 |
| Primary Nominal Current | 130 A |
| Supply Voltage | 3.14 ... 3.46 V |
| Measurement | current: DC, AC, pulsed... |
| Mounting | PCB Mount |
| Application Domain | Industrial |
| Electrical Data — HOB 130-P/SP34 | |
|---|---|
| Primary Nominal RMS Current (IPN) | 130 A |
| Supply Voltage (UC) | 3.14 ... 3.46 V |
| Current Consumption (IC) | 16 ... 24 mA (typ 20 mA) |
| Accuracy & Dynamic Performance | |
|---|---|
| Accuracy @ IPN | 1.20 % of IPN |
| Linearity Error (εL) | 0.45 % of IPN |
| Electrical Offset Voltage (VO E) @ IP = 0 | −10 ... 10 mV |
| Response Time to 90 % of IPN Step | 200 ns |
| Frequency Bandwidth | 1000 kHz |
| Insulation Coordination | |
|---|---|
| RMS Voltage for AC Insulation Test (50 Hz, 1 min) Ud | 4.4 kV |
| Impulse Withstand Voltage (1.2/50 µs) UNi | 9.6 kV |
| Comparative Tracking Index (CTI) | 600 |
| Environmental & Mechanical Characteristics | |
|---|---|
| Ambient Operating Temperature (TA) | −40 ... 105 °C |
| Ambient Storage Temperature (TA st) | −40 ... 105 °C |
| Mass (m) | 30 g |
| Standards & Certifications | |
|---|---|
| IEC 61010-1 | Compliance |
| IEC 61010-2-30 | Compliance |
| IEC 61800-3 | Compliance |
| IEC 61800-5-1 | Compliance |
| IEC 62109-1 | Compliance |
| UL 508 | 2018. |
Note: Specifications are taken from the official HOB 130-P/SP34 datasheet. Parameters that could not be confirmed from the datasheet are marked UNVERIFIED.
Official technical documentation for the HOB 130-P/SP34.
Outline dimensions, pin layout and connection diagrams of the HOB 130-P/SP34 are shown below.
| Outline Dimensions & Mechanical Data | |
|---|---|
| Mass | 30 g |
Note: All dimensions are in millimetres. Refer to the official datasheet for the complete dimension drawing.
Typical applications of the HOB 130-P/SP34.
The characteristic curves of the HOB 130-P/SP34 from the official datasheet are shown below.
| Accuracy & Dynamic Characteristics | |
|---|---|
| Accuracy @ IPN | 1.20 % of IPN |
| Linearity Error (εL) | 0.45 % of IPN |
| Response Time to 90 % of IPN Step | 200 ns |
| Frequency Bandwidth | 1000 kHz |
Note: Refer to the datasheet for the complete set of characteristic curves.
Other models of the HO Series share the same measurement principle, mounting concept and output interface family.
