Authorized Distributor
?
Closed loop (compensated) current transducer using the Hall effect
| Primary Current, Measuring Range | 0 ... ±300 A |
| Supply Voltage | ±12 ... 15 V |
| Operating Temperature Range | −40 ... +85 °C |
| Isolation Test Voltage | 4.5 kV |
| Turns Ratio (NP/NS) | 1 : 2000 |
| Current Consumption (IC) | 16 (@ ±15 V) +I mA |
Single or three phases inverter, Propulsion and braking chopper, Propulsion converter, Auxiliary converter, Battery charger.
The LA 125-P/SP4 is a closed loop (compensated) current transducer from LEM for the electronic measurement of currents: DC, AC, pulsed..., I S R P M, with galvanic isolation.
It offers excellent accuracy, very good linearity, low temperature drift and wide frequency bandwidth. Typical applications include Single or three phases inverter, Propulsion and braking chopper, Propulsion converter and Auxiliary converter.
Key characteristics from the official datasheet: linearity error < 0.15 %; frequency bandwidth (−1 dB) DC ... 100 kHz; operating temperature −40 ... +85 °C.
| General Information | |
|---|---|
| Manufacturer | LEM |
| Product Series | LA |
| Product Reference | LA 125-P/SP4 |
| Supply Voltage | ±12 ... 15 V |
| Measurement | currents: DC, AC, pulsed..., I S R P M |
| Mounting | PCB Mount |
| Application Domain | Railway |
| Electrical Data — LA 125-P/SP4 | |
|---|---|
| Primary Current, Measuring Range (IPM) | 0 ... ±300 A |
| Turns Ratio (NP/NS) | 1 : 2000 |
| Supply Voltage (UC) | ±12 ... 15 V |
| Current Consumption (IC) | 16 (@ ±15 V) +I mA |
| Accuracy & Dynamic Performance | |
|---|---|
| Linearity Error (εL) | < 0.15 % |
| Frequency Bandwidth (BW) | (−1 dB) DC ... 100 kHz |
| Insulation Coordination | |
|---|---|
| RMS Voltage for AC Insulation Test (50 Hz, 1 min) Ud | 4.5 kV |
| Creepage Distance (dCp) | 8.8 mm |
| Clearance (dCI) | 8.8 mm |
| Environmental & Mechanical Characteristics | |
|---|---|
| Ambient Operating Temperature (TA) | −40 ... +85 °C |
| Ambient Storage Temperature (TA st) | −45 ... +100 °C |
| Mass (m) | 55 g |
| Case Material | Insulating plastic case recognized according to UL 94-V0. |
| Recommended PCB Hole | 0.9 mm |
| General Tolerance | ±0.2 mm |
| Standards & Certifications | |
|---|---|
| EN 50155 | Compliance |
Note: Specifications are taken from the official LA 125-P/SP4 datasheet. Parameters that could not be confirmed from the datasheet are marked UNVERIFIED.
Official technical documentation for the LA 125-P/SP4.
Outline dimensions, pin layout and connection diagrams of the LA 125-P/SP4 are shown below.
| Outline Dimensions & Mechanical Data | |
|---|---|
| Recommended PCB Hole | 0.9 mm |
| General Tolerance | ±0.2 mm |
| Mass | 55 g |
| Case Material | Insulating plastic case recognized according to UL 94-V0. |
Note: All dimensions are in millimetres. Refer to the official datasheet for the complete dimension drawing.
Typical applications of the LA 125-P/SP4.
Characteristic curve diagrams are not included in the LA 125-P/SP4 datasheet; the relevant characteristics are the accuracy and dynamic performance data listed below.
| Accuracy & Dynamic Characteristics | |
|---|---|
| Linearity Error (εL) | < 0.15 % |
| Frequency Bandwidth (BW) | (−1 dB) DC ... 100 kHz |
Note: For the full set of performance data, refer to the datasheet.
Other models of the LA 25-200 Series share the same measurement principle, mounting concept and output interface family.
