Authorized Distributor
?
Contactor
| Product Weight | 0.872 kg |
| Product Length/Depth | 132.1 mm |
| Product Height | 115 mm |
| Product Width | 55 mm |
Contactors for Motors
Eaton Moeller® series DILM Contactor, 3 pole, 380 V 400 V 22 kW, 220 V 50 Hz, 240 V 60 Hz, AC operation, Screw terminals
Key technical data includes Catalog Notes: Contacts according to EN 50012; Product Type: Contactor; Altitude: Max. 2000 m.
| General Information | |
|---|---|
| Product Name | Eaton Moeller® series DILM contactor |
| Catalog Number | 277829 |
| Model Code | DILM50(220V50HZ,240V60HZ) |
| EAN | 4015082778293 |
| Product Length/Depth | 132.1 mm |
| Product Height | 115 mm |
| Product Width | 55 mm |
| Product Weight | 0.872 kg |
| Certifications | CE CSA File No.: 012528 IEC/EN 60947-4-1 CSA UL File No.: E29096 VDE 0660 UL IEC/EN 60947 UL Category Control No.: NLDX CSA Class No.: 2411-03, 3211-04 CSA-C22.2 No. 60947-4-1-14 UL 60947-4-1 |
| Catalog Notes | Contacts according to EN 50012 |
| Product Type | Contactor |
| Application | Contactors for Motors |
| Connection | Screw terminals |
| Degree of protection | IP00 |
| Lifespan, mechanical | 10,000,000 Operations (AC operated) |
| Operating frequency | 5000 mechanical Operations/h (AC operated) |
| Overvoltage category | III |
| Pollution degree | 3 |
| Product category | Contactors |
| Protection | Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274) |
| Rated impulse withstand voltage (Uimp) | 8000 V AC |
| Resistance per pole | 1.9 mΩ |
| Suitable for | Also motors with efficiency class IE3 |
| Utilization category | AC-1: Non-inductive or slightly inductive loads, resistance furnaces AC-4: Normal AC induction motors: starting, plugging, reversing, inching AC-3: Normal AC induction motors: starting, switch off during running |
| Voltage type | AC |
| Frame size | FS3 |
| Standards & Design Verification | |
|---|---|
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| 10.2.2 Corrosion resistance | Meets the product standard's requirements. |
| 10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. |
| 10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. |
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects | Meets the product standard's requirements. |
| 10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. |
| 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.7 Inscriptions | Meets the product standard's requirements. |
| 10.3 Degree of protection of assemblies | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard's requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. |
| 10.8 Connections for external conductors | Is the panel builder's responsibility. |
| 10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. |
| Equipment heat dissipation, current-dependent Pvid | 9.9 W |
| Heat dissipation capacity Pdiss | 0 W |
| Heat dissipation per pole, current-dependent Pvid | 3.3 W |
| Rated operational current for specified heat dissipation (In) | 50 A |
| Static heat dissipation, non-current-dependent Pvs | 4.1 W |
| Electrical Characteristics | |
|---|---|
| Rated breaking capacity at 220/230 V | 500 A |
| Rated breaking capacity at 380/400 V | 500 A |
| Rated breaking capacity at 500 V | 500 A |
| Rated breaking capacity at 660/690 V | 320 A |
| Rated insulation voltage (Ui) | 690 V |
| Rated making capacity up to 690 V (cos phi to IEC/EN 60947) | 700 A |
| Rated operational current (Ie) at AC-1, 380 V, 400 V, 415 V | 80 A |
| Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V | 50 A |
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V | 50 A |
| Rated operational current (Ie) at AC-3, 440 V | 50 A |
| Rated operational current (Ie) at AC-3, 500 V | 50 A |
| Rated operational current (Ie) at AC-3, 660 V, 690 V | 32 A |
| Rated operational current (Ie) at AC-4, 220 V, 230 V, 240 V | 21 A |
| Rated operational current (Ie) at AC-4, 440 V | 21 A |
| Rated operational current (Ie) at AC-4, 500 V | 21 A |
| Rated operational current (Ie) at AC-4, 660 V, 690 V | 17 A |
| Rated operational current (Ie) at DC-1, 110 V | 50 A |
| Rated operational current (Ie) at DC-1, 220 V | 45 A |
| Rated operational current (Ie) at DC-1, 60 V | 60 A |
| Rated operational power at AC-3, 240 V, 50 Hz | 17 kW |
| Rated operational power at AC-3, 380/400 V, 50 Hz | 22 kW |
| Rated operational power at AC-3, 415 V, 50 Hz | 30 kW |
| Rated operational power at AC-3, 440 V, 50 Hz | 32 kW |
| Rated operational power at AC-3, 500 V, 50 Hz | 36 kW |
| Rated operational power at AC-3, 690 V, 50 Hz | 30 kW |
| Rated operational power at AC-4, 220/230 V, 50 Hz | 6 kW |
| Rated operational power at AC-4, 240 V, 50 Hz | 6.5 kW |
| Rated operational power at AC-4, 415 V, 50 Hz | 11 kW |
| Rated operational power at AC-4, 440 V, 50 Hz | 12 kW |
| Rated operational power at AC-4, 500 V, 50 Hz | 13 kW |
| Rated operational power at AC-4, 660/690 V, 50 Hz | 14 kW |
| Rated operational voltage (Ue) at AC - max | 690 V |
| Coil & Magnet System | |
|---|---|
| Arcing time | 10 ms |
| Drop-out voltage | AC operated: 0.6 - 0.3 x UC, AC operated |
| Duty factor | 100 % |
| Pick-up voltage | 0.8 - 1.1 V AC x Uc |
| Power consumption, pick-up, 50 Hz | 149 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
| Power consumption, pick-up, 60 Hz | 178 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
| Power consumption, sealing, 50 Hz | 4.1 W, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz 16 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
| Power consumption, sealing, 60 Hz | 19 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz 4.1 W, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
| Rated control supply voltage (Us) at AC, 50 Hz - max | 220 V |
| Rated control supply voltage (Us) at AC, 50 Hz - min | 220 V |
| Rated control supply voltage (Us) at AC, 60 Hz - max | 240 V |
| Rated control supply voltage (Us) at AC, 60 Hz - min | 240 V |
| Switching time (AC operated, make contacts, closing delay) - max | 18 ms |
| Switching time (AC operated, make contacts, closing delay) - min | 12 ms |
| Switching time (AC operated, make contacts, opening delay) - max | 13 ms |
| Switching time (AC operated, make contacts, opening delay) - min | 8 ms |
| Terminal Capacities | |
|---|---|
| Screw size | M6, Terminal screw, Main cables M3.5, Terminal screw, Control circuit cables |
| Screwdriver size | 2, Terminal screw, Pozidriv screwdriver 0.8 x 5.5/1 x 6 mm, Terminal screw, Standard screwdriver |
| Stripping length (control circuit cable) | 10 mm |
| Stripping length (main cable) | 14 mm |
| Terminal capacity (copper band) | 2 x (6 x 9 x 0.8) mm (Number of segments x width x thickness), Main cables |
| Terminal capacity (solid) | 1 x (0.75 - 4) mm², Control circuit cables 2 x (0.75 - 16) mm², Main cables 1 x (0.75 - 16) mm², Main cables 2 x (0.75 - 2.5) mm², Control circuit cables |
| Terminal capacity (stranded) | 1 x (16 - 50) mm², Main cables 2 x (16 - 35) mm², Main cables |
| Tightening torque | 3.3 Nm, Screw terminals, Main cables 1.2 Nm, Screw terminals, Control circuit cables |
| Terminal capacity (flexible with ferrule) | 1 x (0.75 - 2.5) mm², Control circuit cables 1 x (0.75 - 35) mm², Main cables 2 x (0.75 - 25) mm², Main cables 2 x (0.75 - 2.5) mm², Control circuit cables |
| Terminal capacity (solid/stranded AWG) | 18 - 14, Control circuit cables Single 14 - 1, double 14 - 2, Main cables |
| Thu Nov 05 2026 | |
| Eaton Moeller® series DILM contactor | |
| 277829 | |
| DILM50(220V50HZ,240V60HZ) | |
| 4015082778293 | |
| 132.1 mm | |
| 115 mm | |
| 55 mm | |
| 0.872 kg | |
| CE | |
| Contacts according to EN 50012 | |
| Contactor | |
| Max. 2000 m | |
| 60 °C | |
| 80 °C | |
| Additional Specifications | |
|---|---|
| Connection to SmartWire-DT | No |
| Emitted interference | According to EN 60947-1 |
| Interference immunity | According to EN 60947-1 |
| Number of poles | Three-pole |
| Switching capacity (main contacts, general use) | 80 A, Maximum motor rating (UL/CSA) |
| Number of main contacts (normally open contact) | 3 |
| Number of auxiliary contacts (normally closed contacts) | 0 |
| Number of auxiliary contacts (normally open contacts) | 0 |
| Number of contacts (normally closed) as main contact | 0 |
| Special purpose rating of elevator control | 40 HP, 600 V 60 Hz 3-ph, (UL/CSA) 10 HP, 200 V 60 Hz 3-ph, (UL/CSA) 42 A, 240 V 60 Hz 3-ph, (UL/CSA) 30 HP, 480 V 60 Hz 3-ph, (UL/CSA) 41 A, 600 V 60 Hz 3-ph, (UL/CSA) 32.2 A, 200 V 60 Hz 3-ph, (UL/CSA) 15 HP, 240 V 60 Hz 3-ph, (UL/CSA) 40 A, 480 V 60 Hz 3-ph, (UL/CSA) |
| Special purpose rating of resistance air heating | 79 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA) 79 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA) |
| Special purpose rating of tungsten incandescent lamps | 74 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA) 74 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA) |
| Special purpose rating of ballast electrical discharge lamps | 79 A (600V 60Hz 3phase, 347V 60Hz 1phase) 79 A (480V 60Hz 3phase, 277V 60Hz 1phase) |
| Conventional thermal current Ith (1-pole, enclosed) | 145 A |
| Conventional thermal current Ith (3-pole, enclosed) | 58 A |
| Conventional thermal current Ith at 55°C (3-pole, open) | 68 A |
| Conventional thermal current Ith at 60°C (3-pole, open) | 65 A |
| Conventional thermal current Ith of main contacts (1-pole, open) | 162 A |
| Assigned motor power at 115/120 V, 60 Hz, 1-phase | 3 HP |
| Assigned motor power at 200/208 V, 60 Hz, 3-phase | 15 HP |
| Assigned motor power at 230/240 V, 60 Hz, 1-phase | 10 HP |
| Assigned motor power at 230/240 V, 60 Hz, 3-phase | 20 HP |
| Assigned motor power at 460/480 V, 60 Hz, 3-phase | 40 HP |
| Assigned motor power at 575/600 V, 60 Hz, 3-phase | 50 HP |
| Short-circuit current rating (basic rating) | 5 kA, 250 A max. fuse, SCCR (UL/CSA) 5 kA, 250 A max. CB, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 480 V) | 100 kA, 150 A CLASS J max. fuse, SCCR (UL/CSA) 65 kA, 100 A max. CB, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 600 V) | 100 kA, 150 A CLASS J max. fuse, SCCR (UL/CSA) |
| Short-circuit protection rating (type 1 coordination) at 400 V | 160 A gG/gL |
| Short-circuit protection rating (type 1 coordination) at 690 V | 80 A gG/gL |
| Short-circuit protection rating (type 2 coordination) at 400 V | 80 A gG/gL |
| Short-circuit protection rating (type 2 coordination) at 690 V | 63 A gG/gL |
| Shock resistance | 5 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms 7 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms 7 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms 5 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms |
| Altitude | Max. 2000 m |
| Ambient operating temperature - max | 60 °C |
| Ambient storage temperature - max | 80 °C |
| Ambient operating temperature - min | -25 °C |
| Ambient operating temperature (enclosed) - max | 40 °C |
| Ambient operating temperature (enclosed) - min | -25 °C |
| Ambient storage temperature - min | -40 °C |
| Climatic proofing | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Safe isolation | 440 V AC, Between coil and contacts, According to EN 61140 440 V AC, Between the contacts, According to EN 61140 |
Note: Specifications are taken from the official Eaton DILM50(220V50HZ,240V60HZ) product data sheet.
Official technical documentation for the DILM50(220V50HZ,240V60HZ).
Typical applications of the DILM50(220V50HZ,240V60HZ).
Other models in the Eaton Contactors product series.
